APPLY LABEL
Clean & Dry
Ensure the dispenser surface is clean and dry.
Select
Choose the transfer label for your formulation and carefully peel from white backing paper.
Position
Align the dots on the transfer label beside the dots on the dispenser.
Stick
Press firmly across the surface of the clear transfer layer to adhere letters to window.
Peel
Carefully remove the top clear transfer layer, leaving letters in place.
Set
Press & smooth letters with your fingertips.
ADHERE TO WALL & FILL
Prepare Surface
Clean & wipe down and dry the surface you are applying it to with isopropyl alcohol (vodka is a good alternative!) before you stick it.
Prepare Adhesive Sticker
Slide in the backboard which has a clear adhesive sticker on it, into to back of dispenser and pull top protection layer off.
Put On Wall
Lightly push dispenser against wall in the desired location. If you want to adjust location, pull from wall and relocate. Once happy with placement, push dispenser on to the wall to adhere sticker. Wait one hour.
Fill
Unlock lid with key (the key requires strong, firm movement) and take lid off. Fill dispenser with ONNYBODY® ingredients. Replace lid, lock if needed.
Pump
**PLEASE NOTE** Once filled for the first time It can take 30-40 pumps to prime the dispenser with fluid. Just keep pumping until product dispenses.
